Configure your
Rubber plug bolt-on stair tread
Loading the wemStep® configurator...
Rubberdop-bouttreden zijn traptreden die aan de trapbomen worden gemonteerd door middel van bouten.
Rubberdop-bouttreden zijn traptreden die aan de trapbomen worden gemonteerd door middel van bouten.
wemStep® Rubberdop-bouttreden zijn verkrijgbaar met een lage schetsplaat (deze is exact even hoog als de traptrede) en een hoge schetsplaat volgens DIN.
wemStep® Rubberdop-bouttreden kunnen wij van een oppervlaktebehandeling voorzien. U kunt hierbij kiezen uit thermisch verzinken, poedercoaten, beitsen, anodiseren etc. Configureer uw traptreden online en kijk welke opties er voor uw traptreden mogelijk zijn.
wemStep® Rubberdop-bouttreden zijn in gangbare standaard afmetingen verkrijgbaar.
wemStep® Rubberdop-bouttreden met boutplaat worden geleverd met schetsplaat (kopplaat) geproduceerd conform DIN 24531-1.
wemStep® Rubberdop-bouttreden zijn leverbaar in de volgende materiaalsoorten en diktes:
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Hier leest je hoe je de wemStep Configurator kan gebruiken.
Hier leest je hoe je de wemStep Configurator kan gebruiken.
Als u gebruik maakt van onze wemStep® Configurator kunt u voor elke configuratie tekeningen in PDF, DXF, STEP en BIM downloaden.
Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde traptrede. U vindt de documents sectie onderaan de product summary.
Hoe werkt het?
1. Selecteer de gewenste productdocumenten.
2. Klik op “Request documents”.
3. Vul uw naam en e-mailadres in en bevestig met Send.
Onze geautomatiseerde engineer gaat direct aan de slag om de gevraagde documenten voor u voor te bereiden. U ontvangt deze binnenkort per e-mail.
Soms kan het laden bij het aanpassen van een parameter iets langer duren dan u gewend bent. Het beste is om in dit geval een beetje geduld te hebben en de pagina niet te vernieuwen. Het model is op de achtergrond bezig te laden. Uw geduld wordt beloond en uiteindelijk gaat het een stuk sneller dan zelf een tekening maken.
Klik in uw projectmap op het potlood-icoontje onder het product om terug te gaan naar de configuratie. U kunt nu het product aanpassen aan uw wensen. Wanneer u de configurator verlaat, wordt u gevraagd of u de configuratie wilt opslaan. Na uw keuze keert u automatisch terug naar uw projectmap.
Klik in uw projectmap op het potlood-icoontje onder het product om terug te gaan naar de configuratie. U kunt nu het benodigde aantal producten aanpassen aan uw wensen. Wanneer u de configurator verlaat, wordt u gevraagd of u de configuratie wilt opslaan. Na uw keuze keert u automatisch terug naar uw projectmap.
Als u een offerte voor een product hebt aangevraagd krijgt u van ons een email met een complete offerte. In de mail bevindt zich ook een bestelknop waarmee de door u geconfigureerde producten eenvoudig kunt bestellen. Zodra u de producten besteld beginnen wij direct met de productie.
Jazeker, de configurator werkt op alle platformen. Mocht u op een specifiek device onverhoopt toch problemen ondervinden, aarzel dan niet ook contact op nemen.
Do you have a question or would you like a demonstration of our configurator? Please fill in the form below and we will contact you as soon as possible.
Rubber plug bolt-on treads are stair treads that are mounted to the stringers using bolts.
Rubber plug bolt-on treads are stair treads that are mounted to the stringers using bolts.
wemStep® Rubber plug bolt-on treads are available with a low end plate (which is exactly as high as the tread) and a high end plate according to DIN standards.
We can provide wemStep® Rubber plug bolt-on treads with surface treatments. You can choose from hot-dip galvanizing, powder coating, pickling, anodizing, etc. Configure your stair treads online and see which options are available for your treads.
wemStep® Rubber plug bolt-on treads are available in common standard dimensions.
wemStep® Rubber plug bolt-on treads with bolt plate are supplied with an end plate (head plate) produced in accordance with DIN 24531-1.
wemStep® Rubber plug bolt-on treads are available in the following materials and thicknesses:
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Here’s how to use the wemStep Configurator.
Here’s how to use the wemStep Configurator.
If you use our wemStep® Configurator, you can download drawings for each configuration in PDF, DXF, STEP and BIM.
You will also get the complete specification text and product specifications of the configured stair tread. You will find the documents section at the bottom of the product summary.
How does it work?
1. Select the desired product documents.
2. Click on “Request documents.”
3. Enter your name and email address and confirm with Send.
Our automated engineer will immediately get to work preparing the requested documents for you. You will soon receive them by e-mail.
Sometimes, when adjusting a parameter, it may take a little longer to load than you are used to. The best thing to do in this case is to be a little patient and not refresh the page. The model is loading in the background. Your patience will be rewarded and in the end it will be a lot faster than drawing it yourself.
Click on the pencil icon under the product in your project folder to return to the configuration. You can now customize the product to your preferences. When you exit the configurator, you will be asked if you want to save the configuration. After your choice, you will automatically return to your project folder.
Click on the pencil icon under the product in your project folder to return to the configuration. You can now adjust the required number of products to your preferences. When you exit the configurator, you will be asked if you want to save the configuration. After your choice, you will automatically return to your project folder.
Once you have requested a quote for a product you will receive an email from us with a complete quote. In the email there is also an order button with which you can easily order the products you have configured. As soon as you order the products we will immediately start production.
Yes, the configurator works on all platforms. Should you encounter any problems on a specific device, please do not hesitate to contact us.
Do you have a question or would you like a demonstration of our configurator? Please fill in the form below and we will contact you as soon as possible.
Rubberdop-lastreden zijn traptreden die door middel van een lasverbinding aan de trapboom bevestigd worden.
Rubberdop-lastreden zijn traptreden die door middel van een lasverbinding aan de trapboom bevestigd worden.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
wemStep® Rubberdop-lastreden zijn leverbaar in de volgende materiaalsoorten en diktes:
Because wemStep® welded treads are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide a finish for the welded treads. You have options such as hot-dip galvanizing, powder coating, pickling and anodizing. Configure your tread online and see what options are available.
wemStep® Rubberdop-lastreden zijn in de volgende gangbare standaard afmetingen verkrijgbaar:
wemStep® Rubberdop-lastreden zijn leverbaar in de volgende materiaalsoorten en dikt
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Rubberdop-spiltreden worden gebruikt voor spiltrappen en worden aan de spil van de trap gelast.
Rubberdop-spiltreden worden gebruikt voor spiltrappen en worden aan de spil van de trap gelast.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Since wemStep® Spiral Steps are usually still welded, we generally deliver them without surface treatment. If desired, however, we can provide the spiral steps with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your step online and see which options are available.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Rubber plug weld-on treads are stair treads that are attached to the stringer by means of a welded connection.
Rubber plug weld-on treads are stair treads that are attached to the stringer by means of a welded connection.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
wemStep® Rubber plug weld-on treads are available in the following material types and thicknesses:
Because wemStep® welded treads are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide a finish for the welded treads. You have options such as hot-dip galvanizing, powder coating, pickling and anodizing. Configure your tread online and see what options are available.
wemStep® Rubber plug weld on treads are available in the following common standard dimensions:
wemStep® Rubber plug weld-on treads are available in the following material types and thicknesses
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Rubber plug spiral stair treads are used for spiral staircases and are welded to the center post of the staircase.
Rubber plug spiral stair treads are used for spiral staircases and are welded to the center post of the staircase.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
Since wemStep® Spiral Steps are usually still welded, we generally deliver them without surface treatment. If desired, however, we can provide the spiral steps with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your step online and see which options are available.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo-lastreden zijn traptreden die d.m.v. een lasverbinding aan de trapboom bevestigd worden.
Perfo-lastreden zijn traptreden die d.m.v. een lasverbinding aan de trapboom bevestigd worden. Wemeco heeft voor haar lastreden een range aan standaard afmetingen ontwikkeld. Maar zoals altijd geldt ook hier: Uw maatwerk is onze standaard.
wemStep® Perfo-lastreden zijn leverbaar zonder en met afwateringsgaten.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Because wemStep® welded treads are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide a finish for the welded treads. You have options such as hot-dip galvanizing, powder coating, pickling and anodizing. Configure your tread online and see what options are available.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfotreden die aan de trapbomen worden gemonteerd door middel van bouten.
Perfotreden die aan de trapbomen worden gemonteerd door middel van bouten.
wemStep® Perfo-bouttreden zijn leverbaar zonder en met afwateringsgaten.
wemStep® Perfo-bouttreden zijn verkrijgbaar met drie verschillende perfo-afmetingen te weten: 17mm, 8mm met een h.o.h. 50mm en 8mm met een h.o.h 25mm.
Perfo-bouttreden zijn verkrijgbaar met een lage schetsplaat (deze is exact even hoog als de traptrede) en een hoge schetsplaat volgens DIN.
wemStep® Perfo-bouttreden kunnen wij van een oppervlaktebehandeling voorzien. U kunt hierbij kiezen uit thermisch verzinken, poedercoaten, beitsen en anodiseren. Configureer uw traptreden online en kijk welke opties mogelijk zijn.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo-spiltreden worden gebruikt voor spiltrappen en worden aan de spil van de trap gelast.
Perfo-spiltreden worden gebruikt voor spiltrappen en worden aan de spil van de trap gelast.
wemStep® Perfo-spiltreden zijn verkrijgbaar met verschillende perfo-afmetingen te weten: 17mm en 8mm met een h.o.h. 50mm.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Since wemStep® Spiral Steps are usually still welded, we generally deliver them without surface treatment. If desired, however, we can provide the spiral steps with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your step online and see which options are available.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo-laddersporten zijn traptreden die d.m.v. een lasverbinding aan de ladderboom bevestigd worden.
Perfo-laddersporten zijn traptreden die d.m.v. een lasverbinding aan de ladderboom bevestigd worden.
wemStep® Perfo-laddersporten zijn leverbaar in een rechte en een afgeronde uitvoering. De keuze wordt bepaald door de vorm van de ladderbomen.
Wordt de ladder uiteindelijk thermisch verzinkt of gebeitst en gepassiveerd, dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Since wemStep® ladder rungs are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide the ladder rungs with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your rung online and see which options are available.
Uiteraard zijn wij ook in staat om de laddersporten in de door u gewenste klantspecifieke afmetingen te produceren. Voor zowel de hoogte als de breedte geldt dat deze vrij gekozen kunnen worden.
Met behulp van onze wemStep® Configurator kunt u heel eenvoudig uw eigen laddersporten samenstellen. De configurator berekent tevens de bijbehorende maximale belasting. Daarnaast ontvangt u met een druk op de knop uw klantspecifieke dxf, STEP of BIM file die u voor uw eigen tekening kunt gebruiken. Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde trede.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Rubberdop-laddersporten zijn traptreden die d.m.v. een lasverbinding aan de ladderboom bevestigd worden.
Rubberdop-laddersporten zijn traptreden die d.m.v. een lasverbinding aan de ladderboom bevestigd worden.
Wordt de ladder uiteindelijk thermisch verzinkt of gebeitst en gepassiveerd, dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
wemStep® Rubberdop-laddersporten zijn leverbaar in de volgende materiaalsoorten en diktes:
Since wemStep® ladder rungs are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide the ladder rungs with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your rung online and see which options are available.
Uiteraard zijn wij ook in staat om de laddersporten in de door u gewenste klantspecifieke afmetingen te produceren. Voor zowel de hoogte als de breedte geldt dat deze vrij gekozen kunnen worden.
Met behulp van onze wemStep® Configurator kunt u heel eenvoudig uw eigen laddersporten samenstellen. De configurator berekent tevens de bijbehorende maximale belasting. Daarnaast ontvangt u met een druk op de knop uw klantspecifieke dxf, STEP of BIM file die u voor uw eigen tekening kunt gebruiken. Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde trede.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Traanplaat-lastreden zijn traptreden die d.m.v. een lasverbinding aan de trapboom bevestigd worden.
Traanplaat-lastreden zijn traptreden die d.m.v. een lasverbinding aan de trapboom bevestigd worden. Wemeco heeft voor haar lastreden een range aan standaard afmetingen ontwikkeld. Maar zoals altijd geldt ook hier: Uw maatwerk is onze standaard.
wemStep® Traanplaat-lastreden zijn, afhankelijk van de belasting en de toepassing, verkrijgbaar in drie verschillende uitvoeringen te weten: enkelvoudig, 2-voudig en 3-voudig gezette profielen. Daarnaast kan er worden gekozen voor een treden met schoprand.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
wemStep® Traanplaat-lastreden zijn leverbaar in de volgende materiaalsoorten en diktes:
Because wemStep® welded treads are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide a finish for the welded treads. You have options such as hot-dip galvanizing, powder coating, pickling and anodizing. Configure your tread online and see what options are available.
wemStep® Traanplaat-treden zijn in gangbare standaard afmetingen verkrijgbaar:
wemStep® Traanplaat-treden zijn leverbaar in de volgende materiaalsoorten en diktes:
Uiteraard zijn wij ook in staat om de traptreden in de door u gewenste klantspecifieke afmetingen te produceren. Voor zowel de hoogte als de breedte geldt dat deze vrij gekozen kunnen worden.
Met behulp van onze wemStep® Configurator kunt u naast de standaard traptreden ook heel eenvoudig uw eigen traptreden samenstellen. De configurator berekent tevens de bijbehorende maximale belasting. Daarnaast ontvangt u met een druk op de knop uw klantspecifieke dxf, STEP of BIM file die u voor uw eigen tekening kunt gebruiken. Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde trede.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Traanplaat-bouttreden zijn traptreden die aan de trapbomen worden gemonteerd door middel van bouten.
Traanplaat-bouttreden zijn traptreden die aan de trapbomen worden gemonteerd door middel van bouten.
wemStep® Traanplaat-bouttreden zijn, afhankelijk van de belasting en de toepassing, verkrijgbaar in drie verschillende uitvoeringen te weten: enkelvoudig, 2-voudig en 3-voudig gezette profielen.
wemStep® Traanplaat-bouttreden zijn verkrijgbaar met een lage schetsplaat (deze is exact even hoog als de traptrede) en een hoge schetsplaat volgens DIN.
wemStep® Traanplaat-bouttreden zijn leverbaar in de volgende materiaalsoorten en diktes:
wemStep® Traanplaat-bouttreden kunnen wij van een oppervlaktebehandeling voorzien. U kunt hierbij kiezen uit thermisch verzinken, poedercoaten, beitsen, anodiseren etc. Configureer uw traptreden online en kijk welke opties er voor uw traptreden mogelijk zijn.
wemStep® Traanplaat-bouttreden zijn in gangbare standaard afmetingen verkrijgbaar:
wemStep® Traanplaat-bouttreden met boutplaat worden geleverd met schetsplaat (kopplaat) geproduceerd conform DIN 24531-1.
wemStep® Traanplaat-bouttreden zijn leverbaar in de volgende materiaalsoorten en diktes:
Uiteraard zijn wij ook in staat om de traptreden in de door u gewenste klantspecifieke afmetingen te produceren. Voor zowel de hoogte als de breedte geldt dat deze vrij gekozen kunnen worden.
Met behulp van onze wemStep® Configurator kunt u naast de standaard traptreden ook heel eenvoudig uw eigen traptreden samenstellen. De configurator berekent tevens de bijbehorende maximale belasting. Daarnaast ontvangt u met een druk op de knop uw klantspecifieke dxf, STEP of BIM file die u voor uw eigen tekening kunt gebruiken. Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde trede.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Traanplaat-spiltreden worden gebruikt voor spiltrappen en worden aan de spil van de trap gelast.
Traanplaat-spiltreden worden gebruikt voor spiltrappen en worden aan de spil van de trap gelast.
Bij wemStep® Traanplaat-spiltreden geldt het de hele trede als antislip oppervlak.
wemStep® Spiltreden zijn verkrijgbaar in twee verschillende uitvoeringen te weten: enkelvoudig en 2-voudig gezette profielen. Wanneer zowel de voor- als achterzijde van de trede twee keer worden gebogen, spreken we van een dubbele zetting. Deze techniek resulteert niet alleen in een verbeterde draagkracht en stijfheid van de trede, maar ook in een mooie afgeronde afwerking.
wemStep® Traanplaat-spiltreden zijn verkrijgbaar in rechts- en linksdraaiende treden. Dit is afhankelijk van de looprichting van de spiltrap.
Onze standaard wemStep® Traanplaat-spiltreden zijn leverbaar voor spilpijpen met een buitendiameter van 114 en 127mm.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
Wordt de trap uiteindelijk thermisch verzinkt dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
wemStep® Traanplaat-spiltreden zijn leverbaar in de volgende materiaalsoorten en diktes:
Since wemStep® Spiral Steps are usually still welded, we generally deliver them without surface treatment. If desired, however, we can provide the spiral steps with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your step online and see which options are available.
wemStep® Traanplaat-spiltreden zijn in gangbare standaard afmetingen verkrijgbaar:
wemStep® Traanplaat-spiltreden zijn leverbaar in de volgende materiaalsoorten en diktes:
Uiteraard zijn wij ook in staat om de traptreden in de door u gewenste klantspecifieke afmetingen te produceren. Voor zowel de hoogte als de breedte geldt dat deze vrij gekozen kunnen worden.
Met behulp van onze wemStep® Configurator kunt u naast de standaard traptreden ook heel eenvoudig uw eigen traptreden samenstellen. De configurator berekent tevens de bijbehorende maximale belasting. Daarnaast ontvangt u met een druk op de knop uw klantspecifieke dxf, STEP of BIM file die u voor uw eigen tekening kunt gebruiken. Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde trede.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Traanplaat-laddersporten zijn traptreden die d.m.v. een lasverbinding aan de ladderboom bevestigd worden.
Traanplaat-laddersporten zijn traptreden die d.m.v. een lasverbinding aan de ladderboom bevestigd worden.
wemStep® Traanplaat-laddersporten zijn leverbaar in een rechte en een afgeronde uitvoering. De keuze wordt bepaald door de vorm van de ladderbomenen.
Wordt de ladder uiteindelijk thermisch verzinkt of gebeitst en gepassiveerd, dan is het aan te bevelen om de treden te voorzien van zinkuitloopgaten.
wemStep® Traanplaat-laddersporten zijn leverbaar in de volgende materiaalsoorten en diktes:
Since wemStep® ladder rungs are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide the ladder rungs with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your rung online and see which options are available.
wemStep® Traanplaat-laddersporten zijn verkrijgbaar tot een lengte van 2.000mm.
wemStep® Traanplaat-laddersporten zijn leverbaar in de volgende materiaalsoorten en diktes:
Uiteraard zijn wij ook in staat om de laddersporten in de door u gewenste klantspecifieke afmetingen te produceren. Voor zowel de hoogte als de breedte geldt dat deze vrij gekozen kunnen worden.
Met behulp van onze wemStep® Configurator kunt u heel eenvoudig uw eigen laddersporten samenstellen. De configurator berekent tevens de bijbehorende maximale belasting. Daarnaast ontvangt u met een druk op de knop uw klantspecifieke dxf, STEP of BIM file die u voor uw eigen tekening kunt gebruiken. Ook krijgt u de complete bestektekst en productspecificaties van de geconfigureerde trede.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo welding stair treads are stair treads that are attached to the stair stringer by welding.
Perfo-welded steps are stair treads that are attached to the stair stringer by means of a welded connection. Wemeco has developed a range of standard dimensions for its welded steps. But as always, the same applies here: Your custom work is our standard.
wemStep® Perfo-welded steps are available with and without drainage holes.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
Because wemStep® welded treads are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide a finish for the welded treads. You have options such as hot-dip galvanizing, powder coating, pickling and anodizing. Configure your tread online and see what options are available.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo stair treads mounted to stair stringers by bolts.
Perfo stair treads mounted to stair stringers by bolts.
wemStep® Perfo bolt treads are available with and without drainage holes.
wemStep® Perfo bolt treads are available with three different perfo sizes: 17mm, 8mm with a center-to-center distance of 50mm, and 8mm with a center-to-center distance of 25mm.
Perfo bolt treads are available with a low sketch plate (which is exactly as high as the stair tread) and a high sketch plate according to DIN standards.
wemStep® Perforated stair treads can be provided with a surface treatment. You can choose from hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your stair treads online and see which options are available.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo spindle steps are used for spiral staircases and are welded to the spindle of the staircase.
Perfo spindle steps are used for spiral staircases and are welded to the spindle of the staircase.
wemStep® Perfo-step treads are available with different perfo-sizes, namely: 17mm and 8mm with a center-to-center distance of 50mm.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
Since wemStep® Spiral Steps are usually still welded, we generally deliver them without surface treatment. If desired, however, we can provide the spiral steps with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your step online and see which options are available.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Perfo ladder rungs are steps that are attached to the ladder stile by means of a welded connection.
Perfo ladder rungs are steps that are attached to the ladder stile by means of a welded connection.
wemStep® Perfo ladder rungs are available in a straight and a rounded design. The choice is determined by the shape of the ladder stiles.
If the ladder is eventually hot-dip galvanized or pickled and passivated, it is recommended that the treads be fitted with zinc drain holes.
Since wemStep® ladder rungs are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide the ladder rungs with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your rung online and see which options are available.
Of course, we are also able to produce ladder rungs in your desired customer-specific dimensions. Both height and width can be freely chosen.
Using our wemStep® Configurator, you can very easily configure your own ladder rungs. The configurator also calculates the corresponding maximum load. In addition, at the push of a button you receive your customer-specific dxf, STEP or BIM file that you can use for your own drawing. You also get the complete specification text and product specifications of the configured treads.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Rubber plug ladder rungs are steps that are attached to the ladder rail by means of a welded connection.
Rubber plug ladder rungs are steps that are attached to the ladder rail by means of a welded connection.
If the ladder is eventually hot-dip galvanized or pickled and passivated, it is recommended that the treads be fitted with zinc drain holes.
wemStep® Rubber plug ladder rungs are available in the following material types and thicknesses:
Since wemStep® ladder rungs are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide the ladder rungs with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your rung online and see which options are available.
Of course, we are also able to produce ladder rungs in your desired customer-specific dimensions. Both height and width can be freely chosen.
Using our wemStep® Configurator, you can very easily configure your own ladder rungs. The configurator also calculates the corresponding maximum load. In addition, at the push of a button you receive your customer-specific dxf, STEP or BIM file that you can use for your own drawing. You also get the complete specification text and product specifications of the configured treads.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Tear plate weld-on stair treads are stair treads that are attached to the stringer by means of a welded connection.
Tear plate weld-on stair treads are stair treads that are attached to the stringer by means of a welded connection. Wemeco has developed a range of standard dimensions for its welded steps. But as always, the following applies here too: Your custom work is our standard.
wemStep® Tear plate weld-on stair treads for welding are available in three different versions depending on the load and application: single, double, and triple bent profiles. Additionally, steps with a kick plate can be chosen.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
wemStep® Tear plate weld-on stair treads are available in the following materials and thicknesses:
Because wemStep® welded treads are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide a finish for the welded treads. You have options such as hot-dip galvanizing, powder coating, pickling and anodizing. Configure your tread online and see what options are available.
wemStep® Tear plate weld-on stair treads are available in common standard dimensions:
wemStep® Tear plate weld-on stair treads are available in the following materials and thicknesses:
Of course, we are also able to produce stair treads in your desired customer-specific dimensions. Both height and width can be freely chosen.
Using our wemStep® Configurator, you can easily create your own stair treads in addition to the standard ones. The configurator also calculates the corresponding maximum load. Furthermore, with just a click of a button, you receive your customer-specific DXF, STEP, or BIM file that you can use for your own drawing. You also get the complete specification text and product specifications of the configured treads.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Tear plate bolt-on stair treads are stair treads that are mounted to the stringers using bolts.
Tear plate bolt-on stair treads are stair treads that are mounted to the stringers using bolts.
wemStep® Tear plate bolt-on stair treads are available in three different versions depending on the load and application: single, double and triple bent profiles.
wemStep® Tear plate bolt-on stair treads are available with a low end plate (exactly as high as the stair tread) and a high end plate according to DIN.
wemStep® Tear plate bolt-on stair treads are available in the following materials and thicknesses:
We can provide wemStep® Tear plate bolt-on stair treads with a surface treatment. You can choose from hot-dip galvanizing, powder coating, pickling, anodizing, etc. Configure your stair treads online and see which options are possible for your stair treads.
wemStep® Tear plate bolt-on stair treads are available in common standard dimensions:
wemStep® Tear plate bolt-on stair treads with bolt plate are supplied with an end plate (coupling plate) produced in accordance with DIN 24531-1.
wemStep® Tear plate bolt-on stair treads are available in the following materials and thicknesses:
Of course, we are also able to produce stair treads in your desired customer-specific dimensions. Both height and width can be freely chosen.
Using our wemStep® Configurator, you can easily create your own stair treads in addition to the standard ones. The configurator also calculates the corresponding maximum load. Furthermore, with just a click of a button, you receive your customer-specific DXF, STEP, or BIM file that you can use for your own drawing. You also get the complete specification text and product specifications of the configured treads.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Tear plate spiral stair treads are used for spiral staircases and are welded to the spindle of the staircase.
Tear plate spiral stair treads are used for spiral staircases and are welded to the spindle of the staircase.
For wemStep® Tear plate spiral stair treads, the entire tread serves as an anti-slip surface.
wemStep® Spindle treads are available in two different designs: single and double-folded profiles. When both the front and back of the tread are bent twice, we refer to it as a double fold. This technique not only results in improved load-bearing capacity and stiffness of the tread but also in a beautifully rounded finish.
wemStep® Tear plate spiral stair treads are available in right-hand and left-hand turning treads. This depends on the direction of travel of the spiral staircase.
Our standard wemStep® Tear plate spiral stair treads are available for spindle pipes with an outer diameter of 114 and 127mm.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
If the staircase is eventually hot-dip galvanized, it is recommended that the treads be fitted with zinc drain holes.
wemStep® Tear plate spiral stair treads are available in the following materials and thicknesses:
Since wemStep® Spiral Steps are usually still welded, we generally deliver them without surface treatment. If desired, however, we can provide the spiral steps with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your step online and see which options are available.
wemStep® Tear plate spiral stair treads are available in common standard dimensions:
wemStep® Tear plate spiral stair treads are available in the following materials and thicknesses:
Of course, we are also able to produce stair treads in your desired customer-specific dimensions. Both height and width can be freely chosen.
Using our wemStep® Configurator, you can easily create your own stair treads in addition to the standard ones. The configurator also calculates the corresponding maximum load. Furthermore, with just a click of a button, you receive your customer-specific DXF, STEP, or BIM file that you can use for your own drawing. You also get the complete specification text and product specifications of the configured treads.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Tear plate ladder rungs are step treads that are attached to the ladder stringer by means of a welded connection.
Tear plate ladder rungs are step treads that are attached to the ladder stringer by means of a welded connection.
wemStep® Tear plate ladder rungs are available in a straight and rounded design. The choice is determined by the shape of the ladder stringers.
If the ladder is eventually hot-dip galvanized or pickled and passivated, it is recommended that the treads be fitted with zinc drain holes.
wemStep® Tear plate ladder rungs are available in the following materials and thicknesses:
Since wemStep® ladder rungs are usually still welded, we generally supply them without surface treatment. If desired, however, we can provide the ladder rungs with a finish. You have options such as hot-dip galvanizing, powder coating, pickling, and anodizing. Configure your rung online and see which options are available.
wemStep® Tear plate ladder rungs are available up to a length of 2,000mm.
wemStep® Tear plate ladder rungs are available in the following materials and thicknesses:
Of course, we are also able to produce ladder rungs in your desired customer-specific dimensions. Both height and width can be freely chosen.
Using our wemStep® Configurator, you can very easily configure your own ladder rungs. The configurator also calculates the corresponding maximum load. In addition, at the push of a button you receive your customer-specific dxf, STEP or BIM file that you can use for your own drawing. You also get the complete specification text and product specifications of the configured treads.
The maximum permissible load on the step is determined by several factors, namely:
In our product configurator, you can immediately see the maximum permissible load of the step you have configured.
When using our wemStep® Configurator, you can download drawings in PDF, DXF, and BIM formats for each configuration. You will also receive the complete specification text and product specifications for the configured stair tread.
Klantspecifieke producten die zijn gebaseerd op Perfo-treden.
Klantspecifieke producten die zijn gebaseerd op Perfo-treden.
At Wemeco Products B.V., we believe in the power of customization. In addition to our extensive range of high-quality standard products, we also offer the possibility to manufacture customer-specific products. Whether you have an innovative design that incorporates a unique perforated pattern, or you want to integrate a product into a machine that uses our perforated anti-slip surfaces, we are here for you.
Thanks to our extensive machinery and our in-depth knowledge of the production process, we can not only supply individual components, but also produce a complete end product that incorporates the perforated plate. This way, you have one point of contact and we ensure that your products meet the highest standards of quality and functionality. Contact us today to discuss the possibilities!
wemStep Specials are available in the following material types and thicknesses:
We offer a range of possibilities to provide your products with a high-quality surface treatment.
You can choose from various finishes, such as hot-dip galvanizing, powder coating, pickling and passivation, and anodizing. This enables you to not only protect your products, but also give them an aesthetically attractive appearance.
We provide support for product development by guiding the entire process, from the initial idea through to market launch. This includes structuring the development path, assessing manufacturability and feasibility, and coordinating with designers, engineers, and suppliers.
Manufacturability is a crucial aspect of product development that determines the feasibility and efficiency of production processes. It’s about ensuring that a product is not only well-designed but can also be manufactured simply and cost-effectively. We help companies analyze product designs to ensure they are optimal for mass production. This includes selecting appropriate materials, optimizing production processes, and collaborating with suppliers.
By focusing on manufacturability in the early stages of development, we can identify and solve potential problems early on. This results not only in faster time to market but also in lower production costs and higher quality. With our expertise, we ensure that your product is not only innovative but also practical and profitable to manufacture.
Do you have a product that complements our product? Don’t hesitate to contact us.
Customer-specific products based on Perfo treads.
Customer-specific products based on Perfo treads.
At Wemeco Products B.V., we believe in the power of customization. In addition to our extensive range of high-quality standard products, we also offer the possibility to manufacture customer-specific products. Whether you have an innovative design that incorporates a unique perforated pattern, or you want to integrate a product into a machine that uses our perforated anti-slip surfaces, we are here for you.
Thanks to our extensive machinery and our in-depth knowledge of the production process, we can not only supply individual components, but also produce a complete end product that incorporates the perforated plate. This way, you have one point of contact and we ensure that your products meet the highest standards of quality and functionality. Contact us today to discuss the possibilities!
wemStep Specials are available in the following material types and thicknesses:
We offer a range of possibilities to provide your products with a high-quality surface treatment.
You can choose from various finishes, such as hot-dip galvanizing, powder coating, pickling and passivation, and anodizing. This enables you to not only protect your products, but also give them an aesthetically attractive appearance.
We provide support for product development by guiding the entire process, from the initial idea through to market launch. This includes structuring the development path, assessing manufacturability and feasibility, and coordinating with designers, engineers, and suppliers.
Manufacturability is a crucial aspect of product development that determines the feasibility and efficiency of production processes. It’s about ensuring that a product is not only well-designed but can also be manufactured simply and cost-effectively. We help companies analyze product designs to ensure they are optimal for mass production. This includes selecting appropriate materials, optimizing production processes, and collaborating with suppliers.
By focusing on manufacturability in the early stages of development, we can identify and solve potential problems early on. This results not only in faster time to market but also in lower production costs and higher quality. With our expertise, we ensure that your product is not only innovative but also practical and profitable to manufacture.
Do you have a product that complements our product? Don’t hesitate to contact us.
Klantspecifieke producten die zijn gebaseerd op onze Rubberdop-traptreden.
Klantspecifieke producten die zijn gebaseerd op onze Rubberdop-traptreden.
At Wemeco Products B.V., we believe in the power of customization. In addition to our extensive range of high-quality standard products, we also offer the possibility to manufacture customer-specific products. Whether you have an innovative design that incorporates a unique perforated pattern, or you want to integrate a product into a machine that uses our perforated anti-slip surfaces, we are here for you.
Thanks to our extensive machinery and our in-depth knowledge of the production process, we can not only supply individual components, but also produce a complete end product that incorporates the perforated plate. This way, you have one point of contact and we ensure that your products meet the highest standards of quality and functionality. Contact us today to discuss the possibilities!
wemStep Specials are available in the following material types and thicknesses:
We offer a range of possibilities to provide your products with a high-quality surface treatment.
You can choose from various finishes, such as hot-dip galvanizing, powder coating, pickling and passivation, and anodizing. This enables you to not only protect your products, but also give them an aesthetically attractive appearance.
We provide support for product development by guiding the entire process, from the initial idea through to market launch. This includes structuring the development path, assessing manufacturability and feasibility, and coordinating with designers, engineers, and suppliers.
Manufacturability is a crucial aspect of product development that determines the feasibility and efficiency of production processes. It’s about ensuring that a product is not only well-designed but can also be manufactured simply and cost-effectively. We help companies analyze product designs to ensure they are optimal for mass production. This includes selecting appropriate materials, optimizing production processes, and collaborating with suppliers.
By focusing on manufacturability in the early stages of development, we can identify and solve potential problems early on. This results not only in faster time to market but also in lower production costs and higher quality. With our expertise, we ensure that your product is not only innovative but also practical and profitable to manufacture.
Do you have a product that complements our product? Don’t hesitate to contact us.
Custom products based on our Rubber plug stair treads
Custom products based on our Rubber plug stair treads.
At Wemeco Products B.V., we believe in the power of customization. In addition to our extensive range of high-quality standard products, we also offer the possibility to manufacture customer-specific products. Whether you have an innovative design that incorporates a unique perforated pattern, or you want to integrate a product into a machine that uses our perforated anti-slip surfaces, we are here for you.
Thanks to our extensive machinery and our in-depth knowledge of the production process, we can not only supply individual components, but also produce a complete end product that incorporates the perforated plate. This way, you have one point of contact and we ensure that your products meet the highest standards of quality and functionality. Contact us today to discuss the possibilities!
wemStep Specials are available in the following material types and thicknesses:
We offer a range of possibilities to provide your products with a high-quality surface treatment.
You can choose from various finishes, such as hot-dip galvanizing, powder coating, pickling and passivation, and anodizing. This enables you to not only protect your products, but also give them an aesthetically attractive appearance.
We provide support for product development by guiding the entire process, from the initial idea through to market launch. This includes structuring the development path, assessing manufacturability and feasibility, and coordinating with designers, engineers, and suppliers.
Manufacturability is a crucial aspect of product development that determines the feasibility and efficiency of production processes. It’s about ensuring that a product is not only well-designed but can also be manufactured simply and cost-effectively. We help companies analyze product designs to ensure they are optimal for mass production. This includes selecting appropriate materials, optimizing production processes, and collaborating with suppliers.
By focusing on manufacturability in the early stages of development, we can identify and solve potential problems early on. This results not only in faster time to market but also in lower production costs and higher quality. With our expertise, we ensure that your product is not only innovative but also practical and profitable to manufacture.
Do you have a product that complements our product? Don’t hesitate to contact us.
Klantspecifieke producten die zijn gebaseerd op onze Traanpaat-treden.
Klantspecifieke producten die zijn gebaseerd op onze Traanpaat-treden.
At Wemeco Products B.V., we believe in the power of customization. In addition to our extensive range of high-quality standard products, we also offer the possibility to manufacture customer-specific products. Whether you have an innovative design that incorporates a unique perforated pattern, or you want to integrate a product into a machine that uses our perforated anti-slip surfaces, we are here for you.
Thanks to our extensive machinery and our in-depth knowledge of the production process, we can not only supply individual components, but also produce a complete end product that incorporates the perforated plate. This way, you have one point of contact and we ensure that your products meet the highest standards of quality and functionality. Contact us today to discuss the possibilities!
wemStep Specials are available in the following material types and thicknesses:
We offer a range of possibilities to provide your products with a high-quality surface treatment.
You can choose from various finishes, such as hot-dip galvanizing, powder coating, pickling and passivation, and anodizing. This enables you to not only protect your products, but also give them an aesthetically attractive appearance.
We provide support for product development by guiding the entire process, from the initial idea through to market launch. This includes structuring the development path, assessing manufacturability and feasibility, and coordinating with designers, engineers, and suppliers.
Manufacturability is a crucial aspect of product development that determines the feasibility and efficiency of production processes. It’s about ensuring that a product is not only well-designed but can also be manufactured simply and cost-effectively. We help companies analyze product designs to ensure they are optimal for mass production. This includes selecting appropriate materials, optimizing production processes, and collaborating with suppliers.
By focusing on manufacturability in the early stages of development, we can identify and solve potential problems early on. This results not only in faster time to market but also in lower production costs and higher quality. With our expertise, we ensure that your product is not only innovative but also practical and profitable to manufacture.
Do you have a product that complements our product? Don’t hesitate to contact us.
Customer-specific products based on our Tear plate special stair treads.
Customer-specific products based on our Tear plate special stair treads.
At Wemeco Products B.V., we believe in the power of customization. In addition to our extensive range of high-quality standard products, we also offer the possibility to manufacture customer-specific products. Whether you have an innovative design that incorporates a unique perforated pattern, or you want to integrate a product into a machine that uses our perforated anti-slip surfaces, we are here for you.
Thanks to our extensive machinery and our in-depth knowledge of the production process, we can not only supply individual components, but also produce a complete end product that incorporates the perforated plate. This way, you have one point of contact and we ensure that your products meet the highest standards of quality and functionality. Contact us today to discuss the possibilities!
wemStep Specials are available in the following material types and thicknesses:
We offer a range of possibilities to provide your products with a high-quality surface treatment.
You can choose from various finishes, such as hot-dip galvanizing, powder coating, pickling and passivation, and anodizing. This enables you to not only protect your products, but also give them an aesthetically attractive appearance.
We provide support for product development by guiding the entire process, from the initial idea through to market launch. This includes structuring the development path, assessing manufacturability and feasibility, and coordinating with designers, engineers, and suppliers.
Manufacturability is a crucial aspect of product development that determines the feasibility and efficiency of production processes. It’s about ensuring that a product is not only well-designed but can also be manufactured simply and cost-effectively. We help companies analyze product designs to ensure they are optimal for mass production. This includes selecting appropriate materials, optimizing production processes, and collaborating with suppliers.
By focusing on manufacturability in the early stages of development, we can identify and solve potential problems early on. This results not only in faster time to market but also in lower production costs and higher quality. With our expertise, we ensure that your product is not only innovative but also practical and profitable to manufacture.
Do you have a product that complements our product? Don’t hesitate to contact us.
